Kawasaki FX541V Maintenance
| Engine Model: Kawasaki FX541V |
| Engine Type: 4-cycle 2-cylinder air-cooled gasoline engine |
| Total Displacement: 36.8 cu.in (603 cc) |
| Rated Engine Power: 16.5 Hp (12.3 kW) |
| Carburetor Type: 1-barrel, fixed main jet |
____________________________________________________________________________________
Cylinder Compression, kPa (psi) ............... 448 (65)
Cylinder Inside Diameter (Max), mm (in) ............... 73.10 (2.878)
Cylinder Head Warp, mm (in) ............... 0.05 (0.002)
Intake Valve Clearance, mm (in) ............... 0.10-0.15 (0.004-0.006)
Exhaust Valve Clearance, mm (in) ............... 0.10-0.15 (0.004-0.006)
Engine Oil Type ............... SAE 10W-30, 10W-40, 5W-20
API Service Classifications ............... SJ or higher
Oil Capacity (w/o Filter), L (qts) ............... 1.5 (1.6)
Oil Capacity (with New Filter), L (qts) ............... 1.7 (1.8)
Oil Filter Part Number ............... 49065-7002
Air Filter Element Part Number ............... 11011-7058
Throttle Bore Diameter, mm (in) ............... 24.0 (0.94)
Venturi Diameter, mm (in) ............... 18.0 (0.71)
Main Jet ............... #102
Pilot Jet ............... #50
Pilot Screw Setting ............... 1-5/8±1/2 turns
Low Idle Speed (Carburetor), rpm ............... 1450
Low Idle Speed (Governor), rpm ............... 1550
High Idle Speed, rpm ............... 3500-3600
Spark Plug Type ............... NGK BPR4ES
Spark Plug Gap, mm (in) ............... 0.70-0.80 (0.0277-0.0316)
Coil Air Gap, mm (in) ............... 0.20-0.40 (0.0079-0.0158)
Spark Plug Torque ............... 22 Nm (16 ft-lb)
Check Engine Oil Level ............... Every 10 hours
Change Engine Oil ............... Every 100 hours
Clean and Adjust Spark Plug ............... Every 100 hours
Replace Engine Oil Filter ............... Every 200 hours
Replace Air Filter Element ............... Every 250 hours
Check Carburetor Adjustment ............... Every 300 hours
Check and Adjust Idle Speed ............... Every 300 hours
Check and Adjust Valve Clearance ............... Every 300 hours
Clean Combustion Chamber ............... Every 300 hours
Replace Spark Plug ............... Every 300 hours
Clean Fuel Line ............... Every 300 hours
Cylinder Head Bolts, Nm (ft-lb) ............... 27 (20)
Crankcase Cover Bolts, Nm (ft-lb) ............... 27 (20)
Flywheel Bolt, Nm (ft-lb) ............... 56 (41)
Valve Clearance Lock Screws, Nm (ft-lb) ............... 11 (8.2)
Connecting Rod Big End, Nm (ft-lb) ............... 9.8 (7.3)
Rocker Arm Bolts, Nm (ft-lb) ............... 14.7 (11)
Rocker Cover Mounting Bolts, Nm (ft-lb) ............... 5.9 (4.4)
Exhaust Pipe Flange Nuts, Nm (ft-lb) ............... 15 (11)
Spark Plugs, Nm (ft-lb) ............... 22 (16)
Governor Arm Clamp Nut, Nm (ft-lb) ............... 7.8 (5.8)
Carburetor Mounting Nut, Nm (ft-lb) ............... 5.9 (4.4)
Inlet Manifold Bolts, Nm (ft-lb) ............... 5.9 (4.4)
Main Jet, Nm (ft-lb) ............... 2.3 (1.7)
Intake Manifold Bolts, Nm (ft-lb) ............... 5.9 (4.4)
____________________________________________________________________________________
| Small Engines Technical Specifications |
| Car Engines Technical Specifications |
| Outboard Engines Technical Specifications |
| Industrial Engines Technical Specifications |
