| Home / Lawn Tractors / Husqvarna Tractors / Husqvarna GTH2548 |
Husqvarna GTH2548 Specifications
The Husqvarna GTH2548 is a two-wheel drive garden tractor from GTH series. This model was manufactured from 2002 to 2006. The driveline consists of 44.3 cu.in (725 ccc) Kohler Command PRO CV730 4-cycle V-Twin cylinder overhead valve air-cooled gasoline engine with a rated power of 25 Hp (18.4 kW), and belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Husqvarna GTH 2548 is equipped with a manual steering system, electric PTO, dry disc brakes, 16.5x6.50-6 front tires, and 23x10.50-12 rear tires. The operating weight is 528 lbs (240 kg). The Husqvarna GTH2548 garden tractor is compatible with a 48" mid-mount 3-blade side discharge mower deck with a cutting height of 1.5-4.0 in (37-100 mm) and mechanical lift system.
| Engine Specs |
Engine Model ..................... Kohler Command PRO CV730
Engine Type ..................... 4-cycle gasoline OHV V-Twin air-cooled
Number of Cylinders ..................... 2
Displacement, cu.in (cc) ..................... 44.3 (725)
Cylinder Bore, in (mm) ..................... 3.27 (83.0)
Piston Stroke, in (mm) ..................... 2.64 (67.0)
Rated Engine Power, hp (kW) ..................... 25.0 (18.4)
Rated Engine Speed, rpm ..................... 3600
Idle Speed, rpm ..................... 1100-1300
Maximum Torque, Nm (ft-lbs) ..................... 54.1 (39.9)
Torque Speed, rpm ..................... 2800
Compression Ratio ..................... 9.0:1
Fuel System ..................... Carburetor
Carburetor Type ..................... Fixed main jett
Fuel Pump Type ..................... Pulse type
Governor Type ..................... Mechanical, centrifugal type
Lubrication System ..................... Full pressure
Oil Filter Type ..................... Full-flow type
Air Cleaner Type ..................... Replaceable, paper element
Spark Plug Type ..................... Champion RC12YC
Spark Plug Gap, in (mm) ..................... 0.030 (0.76)
Module Air Gap, in (mm) ..................... 0.011-0.013 (0.28-0.33)
Intake Valve Clearance, in (mm) ..................... 0.0015-0.0030 (0.038-0.076)
Exhaust Valve Clearance, in (mm) ..................... 0.0020-0.0035 (0.050-0.088)
Fuel Tank Capacity, gal (L) ..................... 4.0 (15.0)
Oil Capacity, qts (L) ..................... 1.9 (1.8)
| Electrical System |
Electrical System Rating, Volts ..................... 12
Charging System .................... Alternator
Alternator Rating, Amps ................... 15
Starter Type ..................... Electric
Number of Batteries ..................... 1
Battery Rating ..................... 12V, 400 CCA
Electric Ground ..................... Negative
| Power Take Off |
PTO Operational Type ..................... Independent
PTO Clutch ..................... Electric
PTO Speed, rpm ..................... 3600
| Transmission |
Transmission Model ..................... Hydro-Gear
Transmission Type ..................... Belt-driven hydrostatic
Number of Forward Gears ..................... Infinite
Number of Reverse Gears ..................... Infinite
Maximum Forward Speed, mph (kph) ..................... 5.8 (9.3)
Maximum Reverse Speed, mph (kph) ..................... 2.2 (3.5)
| Wheels and Tires |
Wheel Drive System ..................... 2WD 4x2
Steering Configuration ..................... Front steer
Steering System ..................... Manual
Brakes Type ..................... Disc
Front Tire Size ..................... 16.5x6.5-6
Rear Tire Size ..................... 23x10.5-12
| Dimensions and Weight |
Wheelbase, in (mm) ..................... 48 (1220)
Overall Length, in (mm) ..................... 71.3 (1800)
Overall Height, in (mm) ..................... 42.5 (1075)
Overall Width, in (mm) ..................... 50.7 (1280)
Ground Clearance, in (mm) ..................... 7 (175)
Operating Weight, lbs (kg) ..................... 528 (240)
| Mower Deck |
Mower Deck Type ..................... Mid-mount
Number of Blades ..................... 3
Cutting Methods ..................... Side discharge
Cutting Deck Type ..................... Stamped, reinforced
Cutting Width, in (mm) ..................... 48 (1215)
Overall Width, in (mm) ..................... 60 (1520)
Cutting Height, in (mm) ..................... 1.5-4.0 (37-100)
Cut Positions ..................... 6
Deck Drive ..................... Belt
Spindle Material ..................... Aluminum
Anti-Scalp Wheels ..................... 4
Lift System ..................... Mechanical
____________________________________________________________________________________
| Garden Tractors Technical Specifications |