Honda GSV190 Maintenance
| Engine Model: Honda GSV190 |
| Engine Type: 4-cycle OHC single cylinder gasoline engine |
| Total Displacement: 11.4 cu.in (187 cc) |
| Rated Engine Power: 6.5 Hp (4.8 kW) at 3600 rpm |
| Carburetor Type: Horizontal, butterfly valve |
____________________________________________________________________________________
Cylinder Bore Inside Diameter (Maximum), in (mm) .............. 2.727 (69.165)
Cylinder Compression, psi (kPa) .............. 71 (490)
Cylinder Head (Max Out of Flatness), in (mm) .............. 0.004 (0.10)
Intake Valve Clearance, in (mm) .............. 0.0043-0.0075 (0.11-0.19)
Exhaust Valve Clearance, in (mm) .............. 0.0063-0.0094 (0.16-0.24)
Engine Oil Type (Summer) .............. SAE 10W-30
Engine Oil Type (Winter) .............. SAE 5W-30
API Service Classifications .............. SF or SG
Oil Capacity, qts (L) .............. 0.58 (0.55)
Air Filter Element Part Number .............. 17211-ZL8-023
Main Jet .............. #70
Idle Fuel .............. 1-5/8 turns out
Float Height, in (mm) .............. 0.36 (9.20)
Low Idle Speed, rpm .............. 1700±150
High Idle Speed, rpm .............. 3100±150
Spark Plug Type .............. NGK BPR6ES
Spark Plug Gap, in (mm) .............. 0.028-0.031 (0.70-0.80)
Module Air Gap, in (mm) .............. 0.008-0.024 (0.20-0.60)
Ignition Timing, deg .............. 20 BTDC
Spark Plug Torque, Nm (ft-lbs) .............. 20 (14)
Check Engine Oil Level .............. Every 10 hours
Clean Air Filter Element .............. Every 25 hours
Change Engine Oil .............. Every 50 hours
Check and Adjust Spark Plug .............. Every 100 hours
Clean Fuel Strainer .............. Every 100 hours
Check and Adjust Idle Speed .............. Every 100 hours
Check Carburetor Adjustment .............. Every 100 hours
Check and Adjust Valve Clearance .............. Every 100 hours
Replace Spark Plug .............. Every 200 hours
Replace Air Filter Element .............. Every 200 hours
Clean Combustion Chamber .............. Every 200 hours
Clean Fuel Lines .............. Every 200 hours
Oil Pan Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Connecting Rod Bolt (M7x1.0) .............. 12 Nm (9 ft-lb)
Valve Adjusting Lock Nut (M5x0.5) .............. 8 Nm (5.8 ft-lb)
Cylinder Head Cover Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Flywheel Nut (M14x1.5) .............. 75 Nm (55 ft-lb)
Governor Arm Nut (M6x1.0) .............. 10 Nm (7 ft-lb)
Breather Cover Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Air Cleaner Case Bolt (M6x1.0) .............. 10 Nm (7 ft-lb)
Muffler Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Recoil Starter Nut (M6x1.0) .............. 8.5 Nm (6.1 ft-lb)
Fan Cover Stud Bolt (M6x1.0) .............. 12 Nm (9 ft-lb)
Fuel Pump Screw (M5x0.8) .............. 3 Nm (2.2 ft-lb)
Spark Plug (M14x1.25) .............. 20 Nm (14 ft-lb)
____________________________________________________________________________________
| Small Engines Technical Specifications |
| Car Engines Technical Specifications |
| Outboard Engines Technical Specifications |
| Industrial Engines Technical Specifications |
