| Home / Farm Tractors / Case IH Tractors / Case IH 9280 |
Case IH 9280 Specifications
The Case IH 9280 4-wheel drive tractor was manufactured between 1990 and 1995. The Case IH 9280 tractor is powered by Cummins NTA-855 six-cylinder direct injection turbocharged aftercooled diesel engine. A 855 cubic inches (14L) engine has a cylinder bore of 5.5" (140 mm), piston stroke of 6.0" (152 mm), and rated power of 375 hp (280 kW). The Case IH 9280 is fitted with a 2 transmission options: 12x3 full powershift transmission or 12x3 fully synchronized transmission.
The maximum forward speed - 17.3 mph (27.8 km/h), maximum reverse speed - 8.7 mph (14 km/h). The closed center load sensing hydraulic system includes a piston pump with rated fluid flow of 27 gal/min (102.3 l/min). The main relief pressure is 172.5 bar (2500 psi). The tractor is equipped with a hydrostatic and articulated steering system, hydraulic caliper disc brakes, 24.5x32 front tyres, and 24.5x32 rear tyres. The wheelbase is 141.5" (3590 mm).
| Engine Specs |
Engine Model .................. Cummins NTA-855
Engine Type .................. 4-stroke six-cylinder turbocharged aftercooled diesel
Number of Cylinders .................. 6
Displacement, cu.in (L) .................. 855 (14.0)
Cylinder Bore, in (mm) .................. 5.50 (140.0)
Piston Stroke, in (mm) .................. 6.00 (152.0)
Aspiration Type .................. Turbocharged
Rated Engine Power, hp (kW) .................. 375.0 (280.0)
Rated Engine Speed, rpm .................. 2100
Maximum Torque, Nm (ft-lbs) .................. 1716 (1265)
Torque Speed, rpm .................. 1400
Compression Ratio .................. 14.5:1
Firing Order .................. 1-5-3-6-2-4
Fuel System .................. Direct injection
Fuel Filter Type .................. Spin-on with water separator
Air Cleaner Type .................. Dual paper elements
Oil Filter Type .................. Spin-on full flow
Fuel Tank Capacity, gal (L) .................. 250.0 (946.0)
Oil Capacity, qts (L) .................. 44.0 (41.6)
Coolant Capacity, qts (L) .................. 66.0 (62.5)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
| Power Take-Off |
PTO Operational Type .................. Independent
PTO Power, hp (kW) .................. 344.0 (256.5)
PTO Speed, rpm .................. 1000
PTO/Engine Speed, rpm .................. 1000/2098
| Standard Transmission |
Transmission Type .................. PowerShift
Gearbox Type .................. 12F/3R, full powershift
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 3
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 17.3 (27.8)
Maximum Reverse Speed, mph (kph) .................. 8.5 (13.7)
| Optional Transmission |
Transmission Type .................. SyncroShift
Gearbox Type .................. 12F/3R, fully synchronized
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 3
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 17.1 (27.5)
Maximum Reverse Speed, mph (kph) .................. 8.7 (14.0)
| Wheels and Tires |
Wheel Drive System .................. 4WD 4x4
Steering Configuration .................. Front steer
Steering System .................. Hydrostatic and articulated
Brakes Type .................. Hydraulic caliper disc
Front Tire Size .................. 24.5x32
Rear Tire Size .................. 24.5x32
Front Tread, in (mm) .................. 76.5-132.6 (1940-3365)
Rear Tread, in (mm) .................. 76.5-132.6 (1940-3365)
| Hydraulics and Hitch |
Hydraulic System Type .................. Closed center load sensing, pressure compensating
Implement Pump Flow (PowerShift), gpm (Lpm) .................. 27.0 (102.3)
Implement Pump Flow (SyncroShift), gpm (Lpm) .................. 30.0 (113.6)
Hydraulic Pressure, Bar (psi) .................. 172.5 (2500)
Fluid Capacity, gal (L) .................. 26.0 (98.4)
Number of Standard Remote Valves .................. 4
3-Point Hitch Category .................. 3
Standard Lift Capacity at lift pin, lbs (kg) .................. 14000 (6350)
| Dimensions and Weight |
Wheelbase, in (mm) .................. 141.5 (3590)
Overall Length, in (mm) .................. 272.9 (6930)
Height (Exhaust), in (mm) .................. 163.9 (4160)
Width (Minimum), in (mm) .................. 96 (2430)
Ground Clearance, in (mm) .................. 16.5 (415)
Operating Weight, lbs (kg) .................. 29000 (13155)
____________________________________________________________________________________
| Farm Tractors Technical Specifications |