| Home / Farm Tractors / Case IH Tractors / Case IH 9150 |
Case IH 9150 Specifications
The Case IH 9150 tractor was manufactured between 1986 and 1990. The Case IH 9150 driveline consists of Cummins LTA10 4-cycle 6-cylinder turbocharged aftercooled diesel engine and 12x2 full powershift transmission. A 611 cubic inches (10 L) engine has a cylinder bore of 4.95" (126 mm), piston stroke of 5.35" (136 mm), and rated power of 280 hp (208.8 kW). The maximum forward speed - 17.3 mph (27.8 km/h), maximum reverse speed - 4.8 mph (7.7 km/h).
The closed center hydraulic system includes a gear pump with rated fluid flow of 18 gpm (68.1 lpm). The hydraulic system pressure is 172.5 bar (2500 psi). The Case IH 9150 is equipped with a hydrostatic and articulated steering system, hydraulic caliper disc brakes, 20.8x38 front tyres, and 20.8x38 rear tyres. The wheelbase is 130" (3300 mm).
| Engine Specs |
Engine Model .................. Cummins LTA10
Engine Type .................. 4-stroke six-cylinder turbocharged aftercooled diesel
Number of Cylinders .................. 6
Displacement, cu.in (L) .................. 611 (10.0)
Cylinder Bore, in (mm) .................. 4.95 (126.0)
Piston Stroke, in (mm) .................. 5.35 (136.0)
Aspiration Type .................. Turbocharged, aftercooled
Rated Engine Power, hp (kW) .................. 280.0 (208.8)
Rated Engine Speed, rpm .................. 2100
Maximum Torque, Nm (ft-lbs) .................. 1234 (910)
Torque Speed, rpm .................. 1300
Compression Ratio .................. 16.0:1
Firing Order .................. 1-5-3-6-2-4
Fuel System .................. Direct injection
Fuel Filter Type .................. Spin-on with water separator
Air Cleaner Type .................. Dry replaceable element
Oil Filter Type .................. Spin-on full flow
Fuel Tank Capacity, gal (L) .................. 170.0 (643.5)
Oil Capacity, qts (L) .................. 33.0 (31.2)
Coolant Capacity, qts (L) .................. 60.0 (56.8)
Electrical System Rating, Volts .................. 12
Charging System .................. Alternator
| Power Take-Off |
PTO Operational Type .................. Independent
PTO Power, hp (kW) .................. 245.0 (182.7)
PTO Speed, rpm .................. 1000
PTO/Engine Speed, rpm .................. 1000/2099
| Transmission |
Transmission Type .................. Full power shift
Gearbox Type .................. 12F/2R
Number of Forward Gears .................. 12
Number of Reverse Gears .................. 2
Clutch Type .................. Hydraulic wet disc
Maximum Forward Speed, mph (kph) .................. 17.3 (27.8)
Maximum Reverse Speed, mph (kph) .................. 4.8 (7.7)
| Wheels and Tires |
Wheel Drive System .................. 4WD 4x4
Steering Configuration .................. Front steer
Steering System .................. Hydrostatic and articulated
Brakes Type .................. Hydraulic caliper disc
Front Tire Size .................. 20.8x38
Rear Tire Size .................. 20.8x38
Front Tread, in (mm) .................. 60-130 (1520-3300)
Rear Tread, in (mm) .................. 60-130 (1520-3300)
| Hydraulics and Hitch |
Hydraulic System Type .................. Closed center
Implement Pump Flow, gpm (Lpm) .................. 27.0 (102.2)
Hydraulic Pressure, Bar (psi) .................. 172.5 (2500)
Fluid Capacity, gal (L) .................. 18.0 (68.1)
Number of Standard Remote Valves .................. 2/4
3-Point Hitch Category .................. 3
Lift Capacity at lift pin, lbs (kg) .................. 12750 (5785)
| Dimensions and Weight |
Wheelbase, in (mm) .................. 130 (3300)
Overall Length, in (mm) .................. 272.9 (6930)
Height (Exhaust), in (mm) .................. 143 (3630)
Width (Minimum), in (mm) .................. 119.5 (3030)
Ground Clearance, in (mm) .................. 23 (580)
Operating Weight, lbs (kg) .................. 23000 (10430)
____________________________________________________________________________________
| Farm Tractors Technical Specifications |